Footrest comfort installation kit BMW R65 R80 R100 Monolever and Twinshock
-CNC milled footrest adapter
-Aluminum 6020
-Shot-blasted and hard anodized
-Footrests right and left at the same height
-footrest right 65mm and left 105mm back
-Comfortable and natural riding position
-designed for maximum comfort
-TÜV certificate in preparation (can be submitted later)
-suitable for all monolever models
-suitable for all Twinshock models built 1980-1984
-Incl. longer threaded rod for the shift linkage
-incl. SE footrest horns SE-50-13648-00-000
The original footrests of the BMW R65 R80 and R100 are mounted comparatively far forward. In addition to the unusual seating position, there is also very little space between the carburetor and the footrest. In order to create sufficient clearance, BMW has offset the footrests on the right and left by approx. 40 mm. Nevertheless, riders with larger feet in particular bump into the carburetor float chambers when shifting gears or braking.
The SE footrest adapters place the footrests at the same height. We set the brake side back 65 mm and the shift side 105 mm. We lower the height slightly by 10mm to make the knee angle even more comfortable.
Note: The Twinshock models are sometimes fitted with linkages where the threaded rod cannot simply be replaced. You can easily see the difference if you compare the last picture with the linkage of your motorbike. In this case, you will also need this article:
Shift rod with rod ends for 2V Boxer (sport-evolution.de)
