What is the difference between a 400 € and a 700 € shock absorber? You will know after the first 100 metres.
Sensitive response provides a rich road holding with significantly better comfort. YSS and Co can't keep up with that.
This SE Performance shock absorber was specially developed for the old 2-valve models by us in cooperation with TFX Suspension in the Netherlands. It has an ABE, so registration in the papers is no longer necessary.
Gas pressure shock absorber with high quality milled shock absorber housings, completely adjustable from the outside. The gas resevoir is separated from the oil filling by a separating piston. This prevents the formation of foam and ensures reliable damping, even during rapid compression. The spring preload, damping and length can be easily adjusted from the outside. Special tools are not necessary.
The SE Performance damper is a monotube damper with a 46 mm piston. The internal gas reservoir in the damper body is filled with nitrogen. The shock absorber is equipped with an external rebound adjuster, a length adjuster on the strut eye and a spring preload adjuster.
- SE Performance shock absorber
- gas pressure
- Milled 46mm damper housing
- Length 495mm +/-7mm adjustable
- Damping adjustable
- Spring preload adjustable
- Length adjustable
- Spring 80 N/mm
- Stroke 74mm
- with ABE (entry in the vehicle documents is not required)
Can also be used for the R80R R100R to lift the vehicle at the rear 20mm
Paralever:
Dirt: R80/100GS 87-90, R100GS Paris Dakar 89-90, R80/100GS Paris Dakar 90-96
