Main page » Conversion parts » BMW 2-Valve Parts ALL » Everything for rear conversion » BMW 2-valve all models battery box mounting under the gearbox
BMW 2-valve all models battery box mounting under the gearbox
Battery box BMW R45 R65 R80 R100 under engine for mounting under the gearbox
- black powder-coated
- Mounting under the gear unit
- Mounting only possible without exhaust manifold (2-2 exhaust)
- Stainless steel, extremely light
- Dimensions battery 87x150x105
- Suitable for all BMW R65 R75 R80 R90 R100 models
- Suitable for lithium ion battery HTX 14 or LTM 18
- Main stand can be reused if the middle-strut of the stand is offset
The stainless steel battery box is extremely light and gives your BMW a clear view. It is mounted directly under the gearbox and thus lowers the centre of gravity even further. A clear view through the frame triangle gives the BMW a wiry look. The battery box is designed to hold our lithium ion battery type HTX 14Ah, or for more extensive electrical equipment, type LTM 18. Both batteries do their job without any problems, even with high compaction. The batteries have a weight of 1000g, respectively 1200g. The weight saving is more than 10 kg! A lithium ion battery can withstand six times as many charge cycles as a conventional battery. The self-discharge rate is only 5 percent per month. In the long run a worthwhile purchase.
Battery dimensions: depth x width x height: 87 x 150 x 105
Battery not included in delivery
Battery dimensions: depth x width x height: 87 x 150 x 105
Battery not included in delivery
Important: The battery box can only be mounted if there is no exhaust under the gearbox, i.e. no connecting pipe or pre-silencer. This is usually the case with 2-2 system. We offer such systems for all BMW 2-Valve models.
Installation tip: We continue to use the original plus cable for our conversion. We lay this from the starter through the upper engine cover, through the exhaust filter box (or alternatively accessory starter hood) at the rear past the transmission to the "underengine battery box".
For the -ground we use a new cable in 95mm length. This we screw between the negative pole of the battery and the rear gearbox cover.
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login