Main page » Conversion parts » BMW 2-Valve Parts » All for the motorcycle electrics » Motogadget Tacho-,Speedometer Motoscope mini
Motogadget Tacho-,Speedometer Motoscope mini
The motoscope mini with ABE is an extremely small, digital motorcycle instrument. The specially developed LED display is unique in the field of instruments. 251 ultra-bright LEDs form an almost borderless display area with excellent readability, which can be used completely for displaying the display values. Only this innovative, sophisticated technology enables a maximum display area with minimum housing dimensions.
The motoscope mini fits almost any two, three or four wheeler due to its very simple, elegant design and the high-quality appearance. It can support the styling in an exposed place but can also be integrated inconspicuously and 'cleanly'; - everything makes the mini possible!
The case:
The high-quality aluminium housing is milled from solid material and its surface is black anodised. The highly polished version has its own charm. The electronics are completely encapsulated in the housing and thus immune to weather, water, dust and vibration.
Display and functions:
The innovative dot matrix of 251 ultra-bright LEDs represents the speed by a scalable, horizontal strip light and all other functions as a numerical value easily detectable. The speed can also be called up as a numerical value at the push of a button. In order to achieve optimum readability in darkness, sun and twilight, the luminosity of the LEDs is automatically adjusted. A speed value can be entered for the limit range of the permissible speed ('red range';) or as a switching flash function. If this value is exceeded, all LEDs light up pulsating simultaneously.
The highlight: the display of the motoscope mini can show the numerical values not only from left to right, but also from top to bottom. Therefore the instrument can also be mounted upright!
Waitress:
With the supplied menu button or e. g. the headlight flasher button on the handlebar you can switch between the displays. The standard display is the speed value. If required, the other measured values can be called up on the display by briefly pressing a key. Optionally it can be set that the display returns automatically to the speed value after a short time or that a certain display is fixed. Pre-settings or stored values remain stored even without power supply.
Assembly:
Due to its very small dimensions, the motoscope mini is easy to attach to almost any vehicle. Standing alone on the triple clamp or handlebar, in existing instrument panels or embedded in tank or GRP - the instrument can be integrated anywhere.
Connection and sensors:
The simple wiring and detailed installation and operating instructions make it possible to connect the instrument even for users who have not previously dealt with vehicle electrics. The included speedometer sensor made of stainless steel is very small (M5. 25 mm). With the 1. 5 m long connection cable, it can be easily attached to the front or rear wheel. Even vehicles with original mechanical speedo drive can be easily retrofitted with it. The motoscope mini is compatible with many original speedometer sensors (reed contact and proximity sensors) from vehicle manufacturers. In this case, only connections are connected and the mechanical installation of a sensor becomes superfluous. An intelligent teach function makes it easy to calibrate the speedometer - even for vehicles with sensors on the transmission.
Technical data and functions:
Length/width/depth: 59 mm/21. 5 mm/13 mm
Weight: approx. 32 g
Mounting: 2 x M3 threaded bushes
Power consumption during operation: approx. 100 mA
Operating voltage: 7 V - 18 V
Operating temperature: -20° +80°C
Rev counter (LED bar) = 0 - 6/; 8/; 10/; 10/; 14/; 16 krpm
Tachometer (numeric) = 0 - 20 krpm
Limit range adjustment/switching flash = 0 - 20,000 rpm
Speedometer = 0 - 999 km/h or mph
Trip odometer = 0 - 999. 99 km or mi
Total km (adjustable) = up to 99 999 km or mi
Travel time display = 0 - 99:59 h/min
The motoscope mini with ABE is an extremely small, digital motorcycle instrument. The specially developed LED display is unique in the field of instruments. 251 ultra-bright LEDs form an almost borderless display area with excellent readability, which can be used completely for displaying the display values. Only this innovative, sophisticated technology enables a maximum display area with minimum housing dimensions.
The motoscope mini fits almost any two, three or four wheeler due to its very simple, elegant design and the high-quality appearance. It can support the styling in an exposed place but can also be integrated inconspicuously and 'cleanly'; - everything makes the mini possible!
The case:
The high-quality aluminium housing is milled from solid material and its surface is black anodised. The highly polished version has its own charm. The electronics are completely encapsulated in the housing and thus immune to weather, water, dust and vibration.
Display and functions:
The innovative dot matrix of 251 ultra-bright LEDs represents the speed by a scalable, horizontal strip light and all other functions as a numerical value easily detectable. The speed can also be called up as a numerical value at the push of a button. In order to achieve optimum readability in darkness, sun and twilight, the luminosity of the LEDs is automatically adjusted. A speed value can be entered for the limit range of the permissible speed ('red range';) or as a switching flash function. If this value is exceeded, all LEDs light up pulsating simultaneously.
The highlight: the display of the motoscope mini can show the numerical values not only from left to right, but also from top to bottom. Therefore the instrument can also be mounted upright!
Waitress:
With the supplied menu button or e. g. the headlight flasher button on the handlebar you can switch between the displays. The standard display is the speed value. If required, the other measured values can be called up on the display by briefly pressing a key. Optionally it can be set that the display returns automatically to the speed value after a short time or that a certain display is fixed. Pre-settings or stored values remain stored even without power supply.
Assembly:
Due to its very small dimensions, the motoscope mini is easy to attach to almost any vehicle. Standing alone on the triple clamp or handlebar, in existing instrument panels or embedded in tank or GRP - the instrument can be integrated anywhere.
Connection and sensors:
The simple wiring and detailed installation and operating instructions make it possible to connect the instrument even for users who have not previously dealt with vehicle electrics. The included speedometer sensor made of stainless steel is very small (M5/25 mm). With the 1. 5 m long connection cable, it can be easily attached to the front or rear wheel. Even vehicles with original mechanical speedo drive can be easily retrofitted with it. The motoscope mini is compatible with many original speedometer sensors (reed contact and proximity sensors) from vehicle manufacturers. In this case, only connections are connected and the mechanical installation of a sensor becomes superfluous. An intelligent 'Teach function'; enables easy calibration of the speedometer - even for vehicles with sensors on the transmission.
Technical data and functions:
Length/width/depth: 59 mm/21. 5 mm/13 mm
Weight: approx. 32 g
Mounting: 2 x M3 threaded bushes
Power consumption during operation: approx. 100 mA
Operating voltage: 7 V - 18 V
Operating temperature: -20° +80°C
Rev counter (LED bar) = 0 - 6/; 8/; 10/; 10/; 14/; 16 krpm
Tachometer (numeric) = 0 - 20 krpm
Limit range adjustment/switching flash = 0 - 20,000 rpm
Speedometer = 0 - 999 km/h or mph
Trip odometer = 0 - 999. 99 km or mi
Total km (adjustable) = up to 99 999 km or mi
Travel time display = 0 - 99:59 h/min
Scope of delivery:
Instrument with approx. 75 cm connection cable
mini pushbutton
flying fuses
6 Cable end connector
Speedometer sensor (M5 x 0. 5 fine thread, stainless steel, IP 68) with 150 cm connection cable
2 strong neodymium mini magnets
2 fixing screws M3 with washer The motoscope mini fits almost any two, three or four wheeler due to its very simple, elegant design and the high-quality appearance. It can support the styling in an exposed place but can also be integrated inconspicuously and 'cleanly'; - everything makes the mini possible!
The case:
The high-quality aluminium housing is milled from solid material and its surface is black anodised. The highly polished version has its own charm. The electronics are completely encapsulated in the housing and thus immune to weather, water, dust and vibration.
Display and functions:
The innovative dot matrix of 251 ultra-bright LEDs represents the speed by a scalable, horizontal strip light and all other functions as a numerical value easily detectable. The speed can also be called up as a numerical value at the push of a button. In order to achieve optimum readability in darkness, sun and twilight, the luminosity of the LEDs is automatically adjusted. A speed value can be entered for the limit range of the permissible speed ('red range';) or as a switching flash function. If this value is exceeded, all LEDs light up pulsating simultaneously.
The highlight: the display of the motoscope mini can show the numerical values not only from left to right, but also from top to bottom. Therefore the instrument can also be mounted upright!
Waitress:
With the supplied menu button or e. g. the headlight flasher button on the handlebar you can switch between the displays. The standard display is the speed value. If required, the other measured values can be called up on the display by briefly pressing a key. Optionally it can be set that the display returns automatically to the speed value after a short time or that a certain display is fixed. Pre-settings or stored values remain stored even without power supply.
Assembly:
Due to its very small dimensions, the motoscope mini is easy to attach to almost any vehicle. Standing alone on the triple clamp or handlebar, in existing instrument panels or embedded in tank or GRP - the instrument can be integrated anywhere.
Connection and sensors:
The simple wiring and detailed installation and operating instructions make it possible to connect the instrument even for users who have not previously dealt with vehicle electrics. The included speedometer sensor made of stainless steel is very small (M5. 25 mm). With the 1. 5 m long connection cable, it can be easily attached to the front or rear wheel. Even vehicles with original mechanical speedo drive can be easily retrofitted with it. The motoscope mini is compatible with many original speedometer sensors (reed contact and proximity sensors) from vehicle manufacturers. In this case, only connections are connected and the mechanical installation of a sensor becomes superfluous. An intelligent teach function makes it easy to calibrate the speedometer - even for vehicles with sensors on the transmission.
Technical data and functions:
Length/width/depth: 59 mm/21. 5 mm/13 mm
Weight: approx. 32 g
Mounting: 2 x M3 threaded bushes
Power consumption during operation: approx. 100 mA
Operating voltage: 7 V - 18 V
Operating temperature: -20° +80°C
Rev counter (LED bar) = 0 - 6/; 8/; 10/; 10/; 14/; 16 krpm
Tachometer (numeric) = 0 - 20 krpm
Limit range adjustment/switching flash = 0 - 20,000 rpm
Speedometer = 0 - 999 km/h or mph
Trip odometer = 0 - 999. 99 km or mi
Total km (adjustable) = up to 99 999 km or mi
Travel time display = 0 - 99:59 h/min
The motoscope mini with ABE is an extremely small, digital motorcycle instrument. The specially developed LED display is unique in the field of instruments. 251 ultra-bright LEDs form an almost borderless display area with excellent readability, which can be used completely for displaying the display values. Only this innovative, sophisticated technology enables a maximum display area with minimum housing dimensions.
The motoscope mini fits almost any two, three or four wheeler due to its very simple, elegant design and the high-quality appearance. It can support the styling in an exposed place but can also be integrated inconspicuously and 'cleanly'; - everything makes the mini possible!
The case:
The high-quality aluminium housing is milled from solid material and its surface is black anodised. The highly polished version has its own charm. The electronics are completely encapsulated in the housing and thus immune to weather, water, dust and vibration.
Display and functions:
The innovative dot matrix of 251 ultra-bright LEDs represents the speed by a scalable, horizontal strip light and all other functions as a numerical value easily detectable. The speed can also be called up as a numerical value at the push of a button. In order to achieve optimum readability in darkness, sun and twilight, the luminosity of the LEDs is automatically adjusted. A speed value can be entered for the limit range of the permissible speed ('red range';) or as a switching flash function. If this value is exceeded, all LEDs light up pulsating simultaneously.
The highlight: the display of the motoscope mini can show the numerical values not only from left to right, but also from top to bottom. Therefore the instrument can also be mounted upright!
Waitress:
With the supplied menu button or e. g. the headlight flasher button on the handlebar you can switch between the displays. The standard display is the speed value. If required, the other measured values can be called up on the display by briefly pressing a key. Optionally it can be set that the display returns automatically to the speed value after a short time or that a certain display is fixed. Pre-settings or stored values remain stored even without power supply.
Assembly:
Due to its very small dimensions, the motoscope mini is easy to attach to almost any vehicle. Standing alone on the triple clamp or handlebar, in existing instrument panels or embedded in tank or GRP - the instrument can be integrated anywhere.
Connection and sensors:
The simple wiring and detailed installation and operating instructions make it possible to connect the instrument even for users who have not previously dealt with vehicle electrics. The included speedometer sensor made of stainless steel is very small (M5/25 mm). With the 1. 5 m long connection cable, it can be easily attached to the front or rear wheel. Even vehicles with original mechanical speedo drive can be easily retrofitted with it. The motoscope mini is compatible with many original speedometer sensors (reed contact and proximity sensors) from vehicle manufacturers. In this case, only connections are connected and the mechanical installation of a sensor becomes superfluous. An intelligent 'Teach function'; enables easy calibration of the speedometer - even for vehicles with sensors on the transmission.
Technical data and functions:
Length/width/depth: 59 mm/21. 5 mm/13 mm
Weight: approx. 32 g
Mounting: 2 x M3 threaded bushes
Power consumption during operation: approx. 100 mA
Operating voltage: 7 V - 18 V
Operating temperature: -20° +80°C
Rev counter (LED bar) = 0 - 6/; 8/; 10/; 10/; 14/; 16 krpm
Tachometer (numeric) = 0 - 20 krpm
Limit range adjustment/switching flash = 0 - 20,000 rpm
Speedometer = 0 - 999 km/h or mph
Trip odometer = 0 - 999. 99 km or mi
Total km (adjustable) = up to 99 999 km or mi
Travel time display = 0 - 99:59 h/min
Scope of delivery:
Instrument with approx. 75 cm connection cable
mini pushbutton
flying fuses
6 Cable end connector
Speedometer sensor (M5 x 0. 5 fine thread, stainless steel, IP 68) with 150 cm connection cable
2 strong neodymium mini magnets
detailed mounting and operating instructions.
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login
