BMW Boxer 2-Valve shock absorber for motorcycle conversion

• SE Performance shock absorber set
• ​Gasdruck-Stoßdämpfer with external compensation containers
• Milled 38mm damper housing
• Length 330mm +/-7mm adjustable
• Traction stage adjustable
• Pressure stage adjustable (separated for low/highspped)
• Spring prestress adjustable
• Length adjustable
• Spring 20-30-180 N/mm
• Stroke 68mm
  

What is the difference between a €400 and a €700 shock absorber? You will know after the first 100 metres.

Sensitive response provides a rich road holding with much better comfort. YSS and Co can't keep up with that.

This SE Performance shock absorber was specially developed for the old 2-valve models by us in cooperation with TFX Suspension in the Netherlands. It has an ABE, so registration in the papers is no longer necessary.

Gas pressure shock absorber with high-quality milled shock absorber housings, completely adjustable from the outside. The gas resevoir is separated from the oil filling by a separating piston. This prevents the formation of foam and ensures reliable damping, even during rapid compression.  The spring preload, damping and length can be easily adjusted from the outside. Special tools are not necessary.

The SE Performance damper is a monotube damper with a 46 mm piston. The internal gas reservoir in the damper body is filled with nitrogen. The shock absorber is equipped with an external rebound adjuster, a length adjuster on the strut eye and a spring preload adjuster.

-SE Performance shock absorber
-Gas pressure shock absorber
-Milled 46mm shock absorber housing with separating piston
-Length 475mm +/-7mm adjustable
-Damping adjustable
-Spring preload adjustable
-Length adjustable
-Spring 80 N/mm
-stroke 74mm
-with ABE, a registration is therefore not necessary

• Suspension strut extension +10 mm
• Thread M16x1. 0
• Outer dimension for bearing insert 26mm

• Suspension strut extension +20 mm
• Thread M16x1. 0
• Outer dimension for bearing insert 26mm

• Suspension strut extension +30 mm
• Thread M16x1. 0
• Outer dimension for bearing insert 26mm

• Suspension strut extension +40 mm
• Thread M16x1. 0
• Outer dimension for bearing insert 26mm

• Inside dimension: 15mm
• Outer dimension: 26mm
• width: 12mm