Build your own BMW Enduro based on an SE concept bike.

Here you will find all the parts that we specifically use for an SE Enduro concept bike conversion in our workshop.
If you want to assemble your bike completely individually, take a look at the category Conversion Parts - BMW Two-Valve Parts EVERYTHING. There you will find all the parts we offer.

⇦⇩ use filter 

 

 

 

 

BMW SE Handlebar switch for SE wiring harnesses cast alu
BMW SE Handlebar switch for SE wiring harnesses cast alu
248,00 EUR
 
incl. 19% tax excl. Shipping costs
SE complete footrest system for BMW R80R R100R Paralever
SE complete footrest system for BMW R80R R100R Paralever
575,00 EUR
 
incl. 19% tax excl. Shipping costs
SE Tubular handlebar, low Ø 22mm with TÜV
SE Tubular handlebar, low Ø 22mm with TÜV

78,00 EUR
 
incl. 19% tax excl. Shipping costs
Tank cap Monza with adapter for BMW 2-valve models
Tank cap Monza with adapter for BMW 2-valve models
Tank cap Monza for retrofitting for the BMW 2-valve models. Supplied with screw-in adapter.
  • Tank cap including adapter
  • simple assembly
  • suitable for BMW 2-V models
165,00 EUR
 
incl. 19% tax excl. Shipping costs
Tank cap Monza with adapter for BMW 2-valve models in black
Tank cap Monza with adapter for BMW 2-valve models in black
Tank cap Monza retrofitting for the BMW 2-valve models. Supplied with screw-in adapter.
  • Tank cap including adapter
  • simple assembly
  • suitable for BMW 2-V models
  • black coated
  • Tank cap for retrofitting
175,00 EUR
 
incl. 19% tax excl. Shipping costs
SE folding pillion footrests aluminium cna machined
SE folding pillion footrests aluminium cna machined
119,00 EUR
 
incl. 19% tax excl. Shipping costs
Acewell speedometer 4453 with rev counter
Acewell speedometer 4453 with rev counter
299,00 EUR
 
incl. 19% tax excl. Shipping costs
Acewell 085 speedometer with speed display in white
Acewell 085 speedometer with speed display in white
239,00 EUR
 
incl. 19% tax excl. Shipping costs
Acewell 085 Speedometer with speed display in black
Acewell 085 Speedometer with speed display in black
239,00 EUR
 
incl. 19% tax excl. Shipping costs
Acewell 085 speedometer with speed indicator in black
Acewell 085 speedometer with speed indicator in black
239,00 EUR
 
incl. 19% tax excl. Shipping costs
Lenker Moto Cross mit Querstrebe schwarz , 22mm, 79,5mm
Lenker Moto Cross mit Querstrebe schwarz , 22mm, 79,5mm
85,00 EUR
 
incl. 19% tax excl. Shipping costs
SE clutch fitting complete with lever and adjuster for BMW conversions
SE clutch fitting complete with lever and adjuster for BMW conversions
58,50 EUR
 
incl. 19% tax excl. Shipping costs
SE brake cylinder complete with reservoir and lever for BMW conversions
SE brake cylinder complete with reservoir and lever for BMW conversions

 

196,00 EUR
 
incl. 19% tax excl. Shipping costs
Throttle cable set for SE handlebar switch cast aluminum in 3 lengths, suitable for our SE handlebars
Throttle cable set for SE handlebar switch cast aluminum in 3 lengths, suitable for our SE handlebars
  • Throttle grip horns made of aluminium 
  • Top throttle cable 
  • Both throttle cables below 
  • distributor 
  • adjusters 
  • solder nipple 
Comprehensive throttle cable set, suitable for our high-quality cast aluminium handlebar switches.
98,00 EUR
 
incl. 19% tax excl. Shipping costs
Acewell speed sensor for BMW 2-valve Models
Acewell speed sensor for BMW 2-valve Models
- Speed sensor cable (electronic speedometer shaft) for all BMW BOXER 2V models. 
- No speedo shaft or wheel magnets necessary 
- Plug+Play usable with most Acewell speedometers 
- Assembly in minutes
59,00 EUR
 
incl. 19% tax excl. Shipping costs
Adjustable Synto brake lever for SE brake hand pump
Adjustable Synto brake lever for SE brake hand pump

 

99,00 EUR
 
incl. 19% tax excl. Shipping costs
Synto Adjustable clutch lever for SE clutch armature
Synto Adjustable clutch lever for SE clutch armature
  • Precision lever adjustable in 6 steps
  • Adjustable with one hand while driving
  • Perfect ergonomics and a fine feel for the grip
  • Extremely lightweight made of high-strength CNC-milled aluminium
  • grip range 80 mm (4 fingers)
  • Weight 60g
99,00 EUR
 
incl. 19% tax excl. Shipping costs
Handlebar clamp without mirror bracket for SE clutch and brake fittings
Handlebar clamp without mirror bracket for SE clutch and brake fittings
For conversion without mirror holder, suitable for our brake and clutch armature
19,50 EUR
 
incl. 19% tax excl. Shipping costs
BMW R45 R65 R80 R100 wiring harness for Acewell CA085
BMW R45 R65 R80 R100 wiring harness for Acewell CA085
449,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW R45 R65 R65 R80 R100 wiring harness for Acewell 4453
BMW R45 R65 R65 R80 R100 wiring harness for Acewell 4453


 
439,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW R45 R65 R80 R80 R100 wiring harness universal
BMW R45 R65 R80 R80 R100 wiring harness universal
  • Completely new main wiring harness 
  • Plug & Play solution 
  • Circuit diagram supplied 
  • Cable colours like original BMW electrics 
  • Starter relay included 
  • Electrical components of the lamp housing not required 
  • Also for BMW models with narrow tank tunnel 
  • Suitable for all BMW 2-valve models with transistor ignition 
429,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW R45 R65 R80 R100 wiring harness for Motogadget speedometesr
BMW R45 R65 R80 R100 wiring harness for Motogadget speedometesr
445,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW R65 R80 R100 Cast aluminium starter bonnet long
BMW R65 R80 R100 Cast aluminium starter bonnet long
  • aluminum cast 
  • Long version 
  • Perfect fit 
The high quality starter/engine cover creates a smooth transition between engine and gearbox when the original filter box is removed. Afterwards K&N filters or suction funnels are to be used, which finally let the real Cafe Racer breathe freely.
219,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW R65 R80 R100 aluminium cast bonnet short
BMW R65 R80 R100 aluminium cast bonnet short
  • aluminum cast 
  • short version 
  • Perfect fit 
The high quality starter/engine cover creates a smooth transition between engine and gearbox when the original filter box is removed. The original, middle starter bonnet with the BMW lettering remains.
214,50 EUR
 
incl. 19% tax excl. Shipping costs
Spacer disk rear wheel for mounting wider tires BMW Monolever and Paralever
Spacer disk rear wheel for mounting wider tires BMW Monolever and Paralever


BMW R45 R65 R80 R100 Monolever und Paralever Distanzscheibe für Hinterrad

• Distanzscheibe um breite Reifen montieren zu können
• Schwinge kann axial verschoben werden um Spurversatz wieder auszugleichen
• 2 mm Stärke je Scheibe
• es können auch mehrere Scheiben unterlegt werden
• passend für Monolever und Paralever Modelle
• BMW R45 R65 R80 R100

Montage
26,50 EUR
 
incl. 19% tax excl. Shipping costs
BMW 2-valve resistance load control
BMW 2-valve resistance load control

18,50 EUR
 
incl. 19% tax excl. Shipping costs
Stainless steel screw set for SE rear conversion kit BMW Paralever
Stainless steel screw set for SE rear conversion kit BMW Paralever
  • BMW paralever 
  • Suitable for SE rear conversion kit 
  • stainless steel 
  • 39 pieces
24,50 EUR
 
incl. 19% tax excl. Shipping costs
Rear wiring harness Monolever Twinshock for BMW original wiring harnesses
Rear wiring harness Monolever Twinshock for BMW original wiring harnesses
High quality SE rear cable harness for all BMW rear conversions 

Ideal for use with our SE rear frame and rear frame kits, in combination with the original BMW cable harnesses. The SE rear wiring harnesses fit all 2-valve boxer models from the /7 series and save you from changing the original wiring harness. 
65,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW SE rear wiring harness for all SE wiring harnesses
BMW SE rear wiring harness for all SE wiring harnesses
High quality SE rear cable harness for all BMW rear conversions 

Ideal for use with our SE rear frames and rear frame kits, in combination with all SE cable harnesses. 
68,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW R80R R100R /GS Parlever 2-1 exhaust system with ABE
BMW R80R R100R /GS Parlever 2-1 exhaust system with ABE
1.139,00 EUR
 
incl. 19% tax excl. Shipping costs
SE cylinder guard set chrome BMW Monolever Twinshock Paralever all models
SE cylinder guard set chrome BMW Monolever Twinshock Paralever all models
219,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW R80R R100R Paralever rear frame 2-persons with TÜV certificate
BMW R80R R100R Paralever rear frame 2-persons with TÜV certificate
  • Rear frame loop 25mmx2mm 
  • 2-person version
  • Length rear frame 540mm (gives a seat length of 600mm)
  • Width rear frame 200mm
  • 3 CNC milled/turned adapter pieces 
  • Left support milled in angle/radius 
  • Cross-connection with milled radii 
  • 4 welding eyes for seat plate 
  • 2 welding lugs for indicator attachment 
  • 2 welding lugs for mudguard fixing 
  • Suitable for paralever models 
  • TÜV parts certificate according to § 19.3.
from 505,00 EUR
 
incl. 19% tax excl. Shipping costs
Clutch cable - SE Clutch fitting for SE low tubular handlebars
Clutch cable - SE Clutch fitting for SE low tubular handlebars
46,50 EUR
 
incl. 19% tax excl. Shipping costs
Ignition lock configured for BMW conversions
Ignition lock configured for BMW conversions
47,50 EUR
 
incl. 19% tax excl. Shipping costs
BMW R80R/GS R100R/GS Paralever 2-Pers. Enduro Rear Conversion Kit Classic with TÜV
BMW R80R/GS R100R/GS Paralever 2-Pers. Enduro Rear Conversion Kit Classic with TÜV
1.675,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW R80R/GS R100R/GS Paralever 2-Pers. Enduro Rear Conversion Kit Sport with TÜV
BMW R80R/GS R100R/GS Paralever 2-Pers. Enduro Rear Conversion Kit Sport with TÜV
1.725,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW R65GS R80G/S R80ST Monolever 2-Pers. Enduro Rear Conversion Kit Classic with TÜV
BMW R65GS R80G/S R80ST Monolever 2-Pers. Enduro Rear Conversion Kit Classic with TÜV
1.675,00 EUR
 
incl. 19% tax excl. Shipping costs
BMW R65GS R80 G/S R80ST Monolever 2-Pers. Enduro Rear Conversion Kit Sport with TÜV
BMW R65GS R80 G/S R80ST Monolever 2-Pers. Enduro Rear Conversion Kit Sport with TÜV
1.725,00 EUR
 
incl. 19% tax excl. Shipping costs
LSL Lamp holder CNC milled 40mm fork diameter
LSL Lamp holder CNC milled 40mm fork diameter
  • Available in 3 lengths 
  • CNC milled 
  • high-strength aluminium 
  • black anodized 
High-quality 6-piece lamp holder CNC milled from high-strength aluminium. Available in three different lengths (distance to standpipe)
129,95 EUR
 
incl. 19% tax excl. Shipping costs
Headlight 5 3/4 inch with side mounting
Headlight 5 3/4 inch with side mounting
Classic headlight with embossed glass and side mounting. Size of the headlight fits perfectly to the BMW conversions. 
  • 5 3/4"; 
  • H4 
  • 12V 
  • e-approved 
  • 60/55 Watt 
Light emission 134 mm, total diameter 165 mm, mounting width 160 mm 
94,95 EUR
 
incl. 19% tax excl. Shipping costs
Horn 12V black 70mm diameter 105db
Horn 12V black 70mm diameter 105db
24,50 EUR
 
incl. 19% tax excl. Shipping costs
3in1 LED tail-, brake-light, turn signal dark tinted
3in1 LED tail-, brake-light, turn signal dark tinted
indicator tail light brake light LED combi dark tinted 
  • LED technology 
  • Brake light, turn signal and rear light in one unit 
  • E-mark 
  • High light power 
  • aluminium casing 
  • LWH 55mmx20mmx19mm 
price per pair=2 pieces
129,95 EUR
 
incl. 19% tax excl. Shipping costs
Show 1 to 42 (from a total of 75 products)