Main page » Conversion parts » BMW 2-Valve Parts » Speedometers and tachometers

BMW Boxer two-valve Speedometers and tachometers

I have a Monolever, Paralever or Twinshock? →Click here

When converting the BMW electrical system to a different speedo, the original charging indicator lamp is usually omitted or replaced by an LED.
In this case, a resistor must be mounted instead of the lamp, otherwise the battery will not be charged.
This plug and play cable set can be used with all SE wiring harnesses as well as with the original wiring harness.

Connecting the SE charging control resistor: Please open the article and read the description.

14,30 EUR

incl. 19% tax excl. Shipping costs

Acewell speedometer 4453 with rev counter

Needle Speed display
digital speed indicator
Bar fuel gauge
digital temperature display
Trip meters TRIP 1 + 2
total mileage
Integrated lap timer, 99 lap times storable
Average and maximum speed display
Average and maximum speed display
time
voltmeter
and much more. . . . . . . . . . . . . . . .

Recommendation: Order speed sensor (electronic tachometer shaft) at the same time

299,00 EUR

incl. 19% tax excl. Shipping costs

Acewell 085 speedometer with speed display in white

Needle Speed
White dial
digital speed display
Bar fuel gauge
digital temperature display
Trip meters TRIP 1 + 2
total mileage
Integrated lap timer, 99 lap times storable
Average and maximum speed display
Average and maximum speed display
time
voltmeter
and much more. . . . . . . . . . . . . . .

Recommendation: Order speed sensor (electronic tachometer shaft) at the same time

239,00 EUR

incl. 19% tax excl. Shipping costs

Acewell 085 Speedometer with speed display in black

Needle Speed display
Black dial
digital speed
Bar fuel gauge
digital temperature display
Trip meters TRIP 1 + 2
total mileage
Integrated lap timer, 99 lap times storable
Average and maximum speed display
Average and maximum speed display
time
voltmeter
and much more. . . . . . . . . . . . . . . . .

Recommendation: Order speed sensor (electronic tachometer shaft) at the same time

239,00 EUR

incl. 19% tax excl. Shipping costs

Acewell 085 Tacho mit schwarzem Zifferblatt

Needle Speed
Black dial
digital speed display
Bar fuel gauge
digital temperature display
Trip meters TRIP 1 + 2
total mileage
Integrated lap timer, 99 lap times storable
Average and maximum speed display
Average and maximum speed display
time
voltmeter
and much more. . . . . . . . . . . . . . .

Recommendation: Order speed sensor (electronic tachometer shaft) at the same time

239,00 EUR

incl. 19% tax excl. Shipping costs

Acewell Speed Sensor for BMW 2-V Boxer

- Speed sensor cable (electronic speedometer shaft) for all BMW BOXER 2V models.
- No speedo shaft or wheel magnets necessary
- Plug+Play usable with most Acewell speedometers
- Assembly in minutes

46,90 EUR

incl. 19% tax excl. Shipping costs

SE Speedometer holderAcewell for all SE triple clamps

- Suitable for all SE fork bridges
- Screwed from below to fork bridge
- Stainless steel holder black powder coated
- Suitable for Acewell instruments

17,60 EUR

incl. 19% tax excl. Shipping costs

Speedo holder universally for 085 Acewell instrument

universally suitable for all Acewell instruments
except MD052, 27/28XX and 4XXX
oblong hole inside dimension 42mm
oblong hole outer dimension 120mm

12,90 EUR

incl. 19% tax excl. Shipping costs

Motogadget Chronoclassic instrument with Rev counter display

Tachometer (analog/pointer) = 0 - 10 krpm
Speedometer (LCD) = 0 - 350 km/h without mph
Tripmeter = up to 999 km or mi
total kilometres
on-board voltage display = 9 V - 18 V
green control LED = idle (N)
yellow control LED = turn signal left, right
blue control LED = high beam
red warning LED = various warning functions external (e. g. oil pressure switch), internal (speed, temperature, pressure, voltage)
and a lot more.

479,95 EUR

incl. 19% tax excl. Shipping costs

Motogadget Chronoclassic speedometer

Speedometer (analogue/pointer) = 0 - 350 km/h without mph
Rev counter (LCD) = 0 - 10 krpm
Tripmeter = up to 999 km or mi
total kilometres
on-board voltage display = 9 V - 18 V
green control LED = idle (N)
yellow control LED = turn signal left, right
blue control LED = high beam
red warning LED = various warning functions external (e. g. oil pressure switch), internal (speed, temperature, pressure, voltage)
and a lot more..........

479,95 EUR

incl. 19% tax excl. Shipping costs

Motogadget Chronoclassic Rev counter display chromring

479,95 EUR

incl. 19% tax excl. Shipping costs

SE Speedo holder Motogadget Chrono classic for all SE triple clamps

Suitable for all SE fork bridges
Screwed from below to fork bridge
Stainless steel holder black powder coated
Suitable for Motogadget Chrono Classic

24,50 EUR

incl. 19% tax excl. Shipping costs

motogadget Analog speedometer motoscope tiny

mounting diameter: 49 mm
Weight: approx. 96 g
Analog speedometer (pointer) = 0 200 km/h or mph
Speedometer numeric (LED display) = 200 999 km/h or mph
maximum speed = 0 999 km/h or mph
on-board voltage = 9 15 V
Time = 00:00 23:59
Trip odometer = 0 999. 9 km or mi
Total km (adjustable) = up to 99 999 km or mi
indicator lights = turn signal, high beam, neutral, warning lamp

and a lot more........

265,00 EUR

incl. 19% tax excl. Shipping costs

Speedo Mount Motogadget Tiny Mounting Plate black

Dimensions:
length 133 mm
width 53 mm

The mounting plate mst A allows the mounting of all speedometers of the series tiny. The sheet can be shortened and drilled as required.

31,50 EUR

incl. 19% tax excl. Shipping costs

SE Speedo holder Motogadget Tiny for al SE triple clamps

Suitable for all SE fork bridges
Screwed from below to fork bridge
Stainless steel holder black powder coated
Suitable for Motogadget Tiny

22,50 EUR

incl. 19% tax excl. Shipping costs

MOTOGADGET Motoscope pro Dashboard

length/width/depth: 109 mm/; 47 mm/; 11 mm
Rev counter (LED band) = 0 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Tripmeter A & B = up to 999. 9 km or mi
Total kilometres (adjustable) = up to 250000 km or mi
Clock = 23:59 h/min
Rev counter (on LCD) = 0 20000 rpm
adjustable speed warning (switching flash) = 0 20000 rpm
Time measurement = 0 - 100 km/h or 0 - 60 mph 0. 00 30. 59 sec.
Current acceleration = +/;- 0. 00 1. 50 G
Maximum value speed = 0 350 km/h without mph
max. positive acceleration = +1. 50 G
max. negative acceleration = - 1. 50 G

389,95 EUR

incl. 19% tax excl. Shipping costs

MOTOGADGET Motoscope Breakout Box A

The signal cables for the indicator lights in the motoscope pro are connected to the msp Breakout Box A. The signal cables for the indicator lights in the motoscope pro are connected to the msp Breakout Box A.

Tank capacity/reserve
oil pressure switch
Indicator right
Turn signal left
high beam
Neutral
engine warning light

59,00 EUR

incl. 19% tax excl. Shipping costs

MOTOGADGET Mounting bracket Motoscope Pro, black

The mounting plate msp A is a universal mount for the motoscope pro. It is precisely lasered from aluminium and then brushed and black anodized.

Dimensions:
height 12,8 mm, width 10,8 mm
Can be cut to length and drilled as required

32,95 EUR

incl. 19% tax excl. Shipping costs

Motogadget Tacho-,Speedometer Motoscope mini

Length/width/depth: 59 mm/21. 5 mm/13 mm
Weight: approx. 32 g
Mounting: 2 x M3 threaded bushes
Power consumption during operation: approx. 100 mA
Operating voltage: 7 V - 18 V
Operating temperature: -20° +80°C
Rev counter (LED bar) =0-6/8/10/14/16
Tachometer (numeric) = 0 - 20 krpm
Limit range adjustment/switching flash =0-20. 000rpm
Speedometer = 0 - 999 km/h or mph
Trip odometer = 0 - 999. 99 km or mi
total kilometres
Travel time display = 0 - 99:59 h/min

and much more. . . . . . . . . . . . . . . . . . . .

239,00 EUR

incl. 19% tax excl. Shipping costs

Motogadget Motoscope Mini housing with indicator lights

The msm combi frame allows the motoscope mini to be mounted using additional attachments on the handlebars. 5 indicator lights and resistors are already integrated. It is milled from solid aluminium, brushed and black anodised.

The combi frame comes with approx. 50 cm cable, screws and instructions.

The motoscope mini is not included.

95,00 EUR

incl. 19% tax excl. Shipping costs

Mounting plate for Motoscope Mini

The mounting plate allows the mounting of the motoscope mini.

It is made of precisely laser-cut aluminium and anodised or high-gloss polished. It can be cut to length, drilled and adapted according to your own ideas.

The maximum width is 90 mm.

28,00 EUR

incl. 19% tax excl. Shipping costs

SE Speedo holder Motogadget Mini for all SE triple clamps

Suitable for all SE fork bridges
Screwed from below to fork bridge
Stainless steel holder black powder coated
Suitable for Motogadget Mini

21,50 EUR

incl. 19% tax excl. Shipping costs

BMW R65 R80 R100 electronic speedometer sensor for Motogadget

BMW R65 R80 R100 electronic speedometer sensor for Motogadget speedometers. Replaces the mechanical drive on the gearbox.

Connect cables according to the diagram:

red = 12V (+) DC voltage
brown = signal line is connected to the tacho signal input on the motogadget tacho
green = mass (-) is connected to the vehicle mass

49,00 EUR

incl. 19% tax excl. Shipping costs

Oil temperature direct gauge Analogue display for oil filler plug

- Oil temperature direct gauge
- analog display
- Instead of oil filler plug

39,95 EUR

incl. 19% tax excl. Shipping costs

Show 1 to 24 (from a total of 24 products)